Product characteristics
The enterprise standard cylinder;
The piston seal adopts special shape bidirectional sealing structure, compact size, oil storage function;
For the pull rod type cylinder, the front and back cover and aluminum tube cylinder with pillar connection, good reliability;
Compared with ISO15552 standard cylinder, SC series cylinder length is small;
The cylinder buffer adjustment is smooth;
A variety of specifications of the cylinder and cylinder installation accessories for customers to choose to use;
Choose high temperature sealing materials, the use of temperature range 0~150° C.
specification
|
Inside diameter(mm) |
32 |
40 |
50 |
63 |
80 |
100 |
|
|
Acting type |
Double acting |
||||||
|
Fluid |
Air(to befiltered by 40μm filter element) |
||||||
|
Mounting type |
SC |
Basic FA FB CA CB LB TC TCM1 |
|||||
|
SCD/SCT |
Basic FA LB TC TCM1 |
||||||
|
Operating pressure |
0.15~1.0MPa(22~145psi)(1.5~10.0bar) |
||||||
|
Proof pressure |
1.5MPa(215psi)(15bar) |
||||||
|
Temperature ℃ |
-20~70 |
||||||
|
Speed range mm/s |
30~800 |
||||||
|
Cushion type |
Variablecushion |
||||||
|
Adjustable cushion stroke |
21 |
28 |
29 |
||||
|
Port size [Note1] |
PT1/8 |
PT1/4 |
PT3/8 |
PT1/2 |
|||
[Note]
The nozzle type has PT teeth and G teeth
journey
|
Inside diameter(mm) |
Standard stroke(mm) |
Maximum stroke |
Allowable stroke |
|
32 |
25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 |
1000 |
2000 |
|
40 |
25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 |
1200 |
2000 |
|
50 |
25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 |
1200 |
2000 |
|
63 |
25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 |
1500 |
2000 |
|
80 |
25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 |
1500 |
2000 |
|
100 |
25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 |
1500 |
2000 |
[Note]
Within the allowable travel range, if the travel ≥1600mm, for non-standard treatment, other special travel please contact the company.
Installation and use
- When load changes in the work,the cylinder with abundant output capacity shall be selected.
- Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of.
- Necessaryprotection measure shall be taken in the environment with higher humidity,much dust or water drops, oil dustand welding dregs.
- Dirty substances in the pipe must be eliminated before cylinder is connected with pipelineto prevent the entrance of particles into the cylinder.
- The medium used by cylindershall be filtered to 40μm or below.
- Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
- The cylindershall be carried out test run without load before application.Prior to run,buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
- The cylindershall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
- If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface.
Anti-dust caps shall be added in air inlet and outlet ports.
FAQ
Q: What are the two main types of pneumatic cylinders?
Q: What is the difference between pneumatic cylinder and hydraulic cylinder?
Q: What is the difference between electric and pneumatic cylinders?
Hot Tags: sc with tie rod pneumatic cylinder, China sc with tie rod pneumatic cylinder manufacturers, suppliers, factory, retail pneumatic cylinder, purchase pneumatic cylinder
