Description

Technical Parameters

Product feature

HFY Series Pneumatic Air gripper(Pneumatic finger cylinder) is the perfect replacement of Mindman MCHA type air gripper.

It is Available with comprehensive range of bore sizes 16 ~ 32mm. and Highly accurate air driven device for holding work-piece.

Features:

1). Available with comprehensive of bore size

2). Respond to various occasion

3). Highly accurate air driven device for holding work-piece

4). High quality an performances

5). Easy to control and maintain

Applications:

These Air grippers on intensive applications and on high technology machines, as the plastic bottle blowing machines, or the laser cutting machines.

Specification

Bore size(mm)			6	10		16	20	25	32
Acting type			Double acting Single acting
Fluid			Air(to be filtered by 40μm filter element)
Operating pressure	Double acting		0.2~0.7MPa(29~100psi)(2.0~7.0bar)		0.15~0.7MPa(22~100psi)(1.5~7.0bar)
	Single acting	Φ6	0.3~0.7MPa(45~100psi)(3.0~7.0bar)
		Φ10~Φ32	0.25~0.7MPa(36~100psi)(2.5~7.0bar)
Temperature℃			-20~70
Lubrication			Cylinder:Not required;Gripper jaws：Lubricate grease
Cushion type			Bumper
Max.frequency			180(c.p.m)
Sensor switches			CMSH\DMSH\EMSG	CMSG\DMSG\EMSG
Port size			M3×0.5			M5×0.8

Gripping force and stroke

Acting type		Double acting(HFY)
Bore size		6	10	16	20	25	32
Theoretical gripping torque(N·cm)	Closed	7.4×P	17.6×P	90×P	152×P	304×P	637×P
Theoretical gripping torque(N·cm)	Opened	10.6×P	29.4×P	129×P	252×P	473×P	904×P
Max.length of griping point (L)(mm)		30	30	40	60	70	85
Opening angle(°)		30+3 0
Closing angle (°)		-100 -3

[Note] The" P "in the gripping torque shown in the above chart represents the actual use of air pressure.

Application scenario

HFY series pneumatic fingers are widely used in the field of industrial automation, including but not limited to robot arms, automated production lines, packaging machinery, assembly machinery and other occasions. They can accurately clamp, transport and place various work pieces, improving production efficiency and product quality.

Summary

HFY series pneumatic fingers play an important role in the field of industrial automation with their excellent performance, flexible installation and wide application scenarios.

FAQ

Q: Do pneumatic cylinders leak?

A: An air cylinder will leak either at the shaft seal where the rod moves in and out, or past the seals of the internal piston. It is easy to find a leaky shaft seal by putting some bubble soap solution on the shaft.

Q: What is another name for a pneumatic cylinder?

A: Another name for a pneumatic cylinder is an air cylinder. It can also be called a pneumatic actuator, as well. It is important to mention that, generally speaking, an actuator is a mechanical device that takes energy and then it converts that energy into some type of motion.

Q: What are the two main types of pneumatic cylinders?

A: Single-acting cylinders exert force in one direction utilizing compressed air and an internal spring to exert force in the opposite direction, while double-acting cylinders exert force in both directions utilizing compressed air.

Hot Tags: hfy series air gripper, China hfy series air gripper manufacturers, suppliers, factory, mhs series 3 finger pneumatic air claw, mhs series4 finger pneumatic gripper, mhy2 180 degree angular air cylinder, opening and closing type cylindey, parallel open and close type cross roller, parallel pneumatic finger with guide rail

HFY Series Air Gripper

Product feature

Specification

Gripping force and stroke

Application scenario

Summary

FAQ