Product feature
1.open/close type, simplify the gripping action.
2.A sheet metal is installed between the finger and body to reduce abrasion and extend the service life.
3.Dust proof is designed in the finger part, which is applicable to special working environment.
4.All series are all attached with magnet.
5.Many mounting types to be choosed.
Specification
|
Bore size(mm) |
10 |
16 |
20 |
25 |
32 |
|
Acting type |
Double acting |
||||
|
Fluid |
Air(to be filtered by 40μm filter element) |
||||
|
Operating pressure |
Φ10:0.2~0.7MPa(29~100psi)(2.0~7.0bar) |
||||
|
Others:0.15~0.7MPa(22~100psi)(1.5~7.0bar) |
|||||
|
Temperature℃ |
-20~70 |
||||
|
Lubrication |
Cylinder: Not required; Gripper jaws: Lubricate grease |
||||
|
Cushion type |
Bumper |
||||
|
Max.frequency |
60(c.p.m) |
||||
|
Repeatability |
±0.02mm |
||||
|
Gripping force [Note1] |
0.16N.m |
0.55N.m |
1.10N.m |
2.30N.m |
5.00N.m |
|
Open or close angle |
Close:-2°~-5° Open:180°±2° |
||||
|
Port size |
M5×0.8 |
||||
|
Sensor switches |
CMSH\DMSH\EMSH |
||||
[Note1] The gripping force is the value when the operating pressure is 0.5Mpa.
Technical characteristics
Double action mode: provides two-way force to realize the opening and closing of the claw.
High precision: Repeatability up to ±0.2mm, to ensure the stability and accuracy of the clamping.
Various installation methods: Support side installation, front threaded hole installation, front through hole installation, tail installation and other installation methods, easy to select and adjust according to actual needs.
Buffer protection: The use of anti-collision pads and other buffer types, reduce mechanical impact and noise, extend the service life.
High frequency of use: The maximum frequency of use can reach 60cpm (times/minute) to meet the needs of high-speed automated production lines.
Application scenarios
HFR180° open and close air claws are widely used in industrial automation fields, such as robot end effectors, automated assembly lines, packaging machinery, material handling and other fields. Its precise opening and closing control and stable clamping performance make it an important tool to improve production efficiency and product quality.
FAQ
Q: How many pneumatic cylinders are there?
Q: How long do pneumatic cylinders last?
Q: How do I know if my pneumatic cylinder is bad?
Hot Tags: hfr 180 degree angular air cylinder, China hfr 180 degree angular air cylinder manufacturers, suppliers, factory, air gripper fixture pneumatic double acting, hfd series compact air gripper, hfkl series extended pneumatic finger cylinder, mhs series finger pneumatic gripper, parallel pneumatic finger with guide rail, pneumatic finger cylinder
