Product Features
The cylinder body is made ofhigh-precision chromium alloy,the surface is hard oxidized,high strength, no deformation,internal mirror surface treatment,small tolerances, and stronger sealing
Cylinder scal adopts imported seal ringwear-resistant belt, built-in balanced oil storage copper bushing,and enhances the service life of the cylinder
Built-in double rubber cushion,effectively reduce the impact of piston and cylinder,reduce noise, and last longer.
Specification
|
Inside diameter(mm) |
12 |
16 |
20 |
25 |
32 |
40 |
50 |
63 |
80 |
100 |
|
|
Acting type |
Double acting |
||||||||||
|
Single acting_Push type,Single acting_Pull type |
- |
||||||||||
|
Fluid |
Air(to befiltered by 40μm filter element) |
||||||||||
|
Operating pressure |
Double acting |
0.15~1.0MPa(22~145psi) |
|||||||||
|
Single acting |
0.2~1.0MPa(28~145psi) |
||||||||||
|
Proof pressure |
1.5MPa(215psi) |
||||||||||
|
Temperature ℃ |
-20~70 |
||||||||||
|
Speed range mm/s |
Double acting:30~500 Single acting:50~500 |
||||||||||
|
Cushion type |
Bumper |
||||||||||
|
Port size [Note1] |
M5×0.8 |
PT1/8 |
PT1/4 |
PT3/8 |
|||||||
[Note]
The nozzle type has PT teeth, G teeth and NPT teeth.
Journey
|
Inside diameter(mm) |
Standard stroke(mm) |
Maximum stroke |
|
|
12 |
Double action |
5 10 15 20 25 30 35 40 45 50 |
50 |
|
Single action |
5 10 15 20 |
20 |
|
|
16 |
Double action |
5 10 15 20 25 30 35 40 45 50 55 60 |
60 |
|
Single action |
5 10 15 20 |
20 |
|
|
20 |
Double action |
5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 |
100 |
|
25 |
Single action |
5 10 15 20 25 30 |
30 |
|
32 |
Double action |
5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 |
100 |
|
40 |
|||
|
50 |
Single action |
5 10 15 20 25 30 |
30 |
|
63 |
|||
|
80 |
Double action |
5 10 15 20 25 30 |
30 |
|
100 |
5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 |
100 |
|
[Note]
- Within the allowed range of travel, when the travel > maximum travel, non-standard processing, other special travel please contact the company;
- The non-standard stroke within the maximum stroke range is reformed from the standard stroke above the first level, and its external dimension is the upper level standard stroke cylinder
The overall dimensions of... For example, the non-standard stroke cylinder with a stroke of 23 is restructured from the standard cylinder with a standard stroke of 25, and its dimensions are the same.
Installation and use
- When load changes in the work,the cylinder with abundant output capacity shall be selected.
- Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
- Necessary protection measureshall be taken in the environment with higher humidity,much dust or water drops,oildustand welding dregs.
- Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
- The medium used by cylindershall be filtered to 40μm or below.
- As both of the front cover and piston of the cylinder are short,typically too large stroke can not be selected.
- Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
- The cylindershall avoid the influence of sideload in operation to maintain the normal work of cylinder and extend the service life
- If the cylinder is dismantled and stored for a long time,please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outletports. The front and back cover can notbe dismantled,which shal beespecially noticed.
- C clip Installation:
- Removal &Installation of C clip must be done with proper tool &care.
- Ensure Cclipis securely fitted into the proper slot to prevent leakage.
FAQ
Q: What is the smallest 3 cylinder engine?
Q: What is another name for a pneumatic cylinder?
Q: Are pneumatic cylinders strong?
Hot Tags: acq series compact cylinder, China acq series compact cylinder manufacturers, suppliers, factory, acq series compact cylinder, airtac wide air claw pneumatic element, double acting compact air cylinder, hft series parallel wide opening cylinder, sda series compact cylinder, wide parallel air gripper cylinder
